Quick answer: Screen tearing happens when your GPU sends a new frame while the monitor is still drawing the previous one, so parts of two frames appear at once. V-Sync fixes tearing by syncing frames to the refresh rate but can add input lag and stutter. Adaptive sync technologies like G-Sync and FreeSync remove tearing with less lag. Many players use adaptive sync plus a frame cap slightly below refresh rate.
Key takeaways
- Tearing is caused by frame timing mismatches.
- V-Sync stops tearing but can add input lag.
- G-Sync and FreeSync adapt refresh to frame rate.
- A frame cap helps keep adaptive sync active.
- Competitive players often prioritise low latency.
You are turning quickly in a game and notice a horizontal split across the screen, with the top and bottom halves slightly out of line. That is screen tearing. The classic solution is V-Sync, a setting found in almost every PC game. But V-Sync has trade-offs, and modern alternatives often work better. Understanding how these settings interact helps you pick the smoothest, most responsive setup for your PC.
Why Screen Tearing Happens
Your monitor refreshes at a fixed rate, such as 60 or 144 times per second. Your graphics card produces frames at its own varying pace. If the GPU sends a new frame while the monitor is partway through drawing the previous one, the screen shows parts of two frames at once. The misalignment between them is the tear. Tearing is most noticeable during fast horizontal movement.
What V-Sync Does
V-Sync (vertical synchronisation) tells the GPU to wait until the monitor finishes a refresh before sending the next frame. This removes tearing because each refresh shows a complete frame.
The Trade-Offs of V-Sync
Input Lag
Because frames wait for the next refresh, there is a delay between your input and what appears on screen. Competitive players often notice this.
Stutter When Frame Rate Drops
If your GPU cannot keep up with the refresh rate, traditional double-buffered V-Sync can drop to lower fixed rates, causing noticeable stutter. Triple buffering can soften this, at the cost of some latency.
Alternatives and Enhancements
Variable Refresh Rate
G-Sync and FreeSync let the monitor match the GPU’s frame rate, removing tearing without the full V-Sync penalty. Our comparison of G-Sync vs FreeSync explains how they work.
Frame Rate Caps
Limiting your frame rate slightly below the monitor’s refresh rate keeps frame delivery consistent and, combined with VRR, avoids hitting the V-Sync ceiling.
Driver-Level Sync Options
GPU drivers offer options such as fast sync or enhanced sync, which aim to reduce tearing with less input lag when frame rates exceed the refresh rate. Behaviour varies by game.
Low-Latency Modes
Driver and in-game low-latency features reduce the queue of frames waiting to be displayed, lowering input lag.
Recommended Setups
If You Have a VRR Monitor
- Enable G-Sync or FreeSync.
- Cap the frame rate a little below the maximum refresh rate.
- Many players also enable V-Sync in the driver as a safety net and disable it in game; test what feels best.
If You Have a Fixed Refresh Monitor and Play Single-Player Games
- Enable V-Sync to remove tearing.
- Consider triple buffering if available.
- Lower graphics settings slightly if frame rate often drops below refresh rate.
If You Play Competitive Games
- Many players disable V-Sync for the lowest latency and accept some tearing.
- Use low-latency modes and keep frame rates high.
- Our guide to optimising a gaming PC for esports covers more tweaks.
In-Game vs Driver Settings
Games have their own V-Sync options, and so do GPU drivers. To avoid conflicts, choose one place to control it. Driver-level settings apply globally or per game; in-game settings are simpler. If you see odd behaviour, make sure you are not enabling two different sync methods at once.
Frame Rate, Refresh Rate and Smoothness
Smoothness depends on consistent frame delivery, not only high average FPS. A game running at a stable frame rate that matches your display often feels smoother than one that jumps up and down. Our article on monitor refresh rates explains why your monitor’s refresh rate matters.
Common Myths
- “V-Sync always reduces performance.” It limits frame rate to the refresh rate and adds latency, but it does not make your GPU weaker.
- “Tearing only happens above the refresh rate.” Tearing can occur at any frame rate without sync.
- “High FPS removes tearing.” Higher FPS can make tears smaller but does not eliminate them.
How to Test Your Settings
Pick a game you play often and a repeatable scene, such as a quick spin of the camera in an open area. Try each setting combination for a few minutes: V-Sync on, V-Sync off, VRR with a cap. Pay attention to tearing, stutter and how responsive aiming feels. Your own perception matters more than any chart, because sensitivity to tearing and latency varies a lot from person to person.
Understanding Frame Pacing
Two games can both report the same average frame rate but feel very different. That is because of frame pacing, the consistency of the time between frames. If frames arrive at uneven intervals, motion looks jerky even when the average looks high. Sync settings, frame caps and VRR all influence frame pacing. A frame time graph from a monitoring overlay can reveal spikes that an FPS counter hides. If you see regular spikes, try a frame cap, update drivers and check for background programs that might interrupt the game. Smooth, even frame delivery is often more noticeable to your eyes than a slightly higher average.
A Note on Laptops
Gaming laptops with high refresh screens often support adaptive sync on the internal display, sometimes only when the discrete GPU drives the screen directly. Check the laptop’s GPU mode settings to get the full benefit.
Practical Guide: Going Deeper
Sync options compared
| Option | Tearing | Input lag | Notes |
|---|---|---|---|
| No sync | Possible | Lowest | Fast but tearing |
| V-Sync | None | Higher | Can stutter below refresh |
| Adaptive sync | None in range | Low | Needs compatible monitor |
| Fast or Enhanced Sync | Reduced | Low | Driver features |
How Refresh Rate and FPS Interact
Mismatch Effects
When FPS exceeds or falls below refresh rate, frames do not align with monitor refreshes.
Stutter
V-Sync can cause stutter when frame rates drop below refresh rate.
Setting Up Adaptive Sync
Enable in Monitor and Driver
Turn on FreeSync or G-Sync in monitor menu and GPU control panel.
Frame Cap
Cap FPS a few frames below refresh rate.
Choosing for Your Games
Competitive
Lower latency matters, so many use adaptive sync with cap or no sync.
Single-Player
Smoothness matters, so adaptive sync or V-Sync works well.
Troubleshooting
Flicker
Some monitors flicker with adaptive sync at low frame rates.
Settings Conflicts
Avoid enabling multiple sync options in game and driver.
Step-by-Step Action Plan
- Enable FreeSync or G-Sync in the monitor menu.
- Enable it in the GPU control panel.
- Set a frame cap a few FPS below refresh rate.
- Choose V-Sync settings according to your GPU’s guidance.
- Test in a game with fast camera movement.
Common Mistakes to Avoid
- Enabling V-Sync in both the game and driver.
- Running adaptive sync without a frame cap.
- Leaving adaptive sync off in the monitor menu.
- Using a cable or port that does not support VRR.
Quick Glossary
- Refresh rate: How many times a monitor redraws per second.
- Frame rate: Frames produced per second by the GPU.
- VRR: Variable refresh rate, which adapts refresh to frame rate.
- LFC: Low framerate compensation, which keeps adaptive sync working at low FPS.
Final Thoughts
Screen tearing is a common issue caused by mismatched frame timing, and V-Sync, adaptive sync and frame caps each offer solutions. Choose based on your monitor and games. For many players, adaptive sync plus a frame cap provides the best balance of smoothness and responsiveness.
Related reading:
Frequently Asked Questions
Does FreeSync work with NVIDIA cards?
Many FreeSync monitors work with NVIDIA as G-Sync Compatible.
Should I enable V-Sync in game or driver?
Follow your setup; avoid enabling multiple conflicting options.
Should I turn V-Sync on or off?
For single-player games on a fixed refresh monitor, on is often better. For competitive play, many disable it. With VRR, a frame cap is usually the best approach.
Why does V-Sync cause input lag?
Frames wait for the monitor’s refresh, which delays when your input appears on screen.
Does a frame rate cap help with tearing?
On its own, not completely, but combined with VRR it keeps frame delivery within the smooth range.
Is triple buffering better than double buffering?
It can reduce stutter when frame rates drop, at the cost of slightly more latency.



