Refresh vs FPSA free tool on gamingpcprice.com

Refresh rate versus FPS

A 144 Hz panel cannot uniquely show more than 144 new pictures a second. Extra frames the GPU renders are not extra displays. This is not an input-lag measurement.

Compare refresh rate with frames per second

Refresh rate is how often the panel can present a new picture

Frames per second is how many pictures the game produced. Hertz on a monitor is how many times each second the panel can replace what it is showing. They use similar-looking numbers and they are not the same quantity. A 144 Hz panel can present at most 144 new pictures a second. If the game produces 200 FPS, the extra 56 frames are additional candidates the display cannot uniquely show in that second without technologies that change the meaning of a “frame”. If the game produces 80 FPS on the same panel, then without variable refresh there are unused refresh opportunities.

This page reports three numbers: the unique frames the panel can newly show each second, which is the minimum of FPS and refresh rate; the extra frames produced beyond refresh; and the unused refresh slots when FPS sits below refresh. For 144 Hz and 200 FPS those figures are 144, 56 and 0. For 144 Hz and 80 FPS they are 80, 0 and 64. Both identities are tested automatically.

Variable refresh rate (the family that includes Adaptive-Sync, FreeSync and G-Sync) lets many panels wait for the next frame inside a supported range instead of repeating a stale picture on a fixed clock. That reduces certain stutter and tearing artefacts; it does not invent extra pictures the GPU never drew, and it does not turn 80 FPS into 144 unique images.

VSync, tearing and why capping exists

Without VSync, a game that is out of step with the refresh clock can present a frame that contains a slice of the previous picture — tearing. With VSync, the game may wait for a refresh and add latency. Modern independent flip and VRR modes try to keep waits short. This calculator does not estimate click-to-photon latency; the sibling FPS-to-milliseconds page converts a frame rate into a frame time and likewise refuses to call that input lag.

Capping FPS near the refresh rate is a common way to stop a GPU from rendering dozens of pictures the panel will never uniquely display, which can cut power draw and heat. Whether you cap at 141, 144 or leave a small headroom for VRR is a taste and driver-quality question, not something a one-line formula should dictate.

A high-refresh panel paired with an FPS that stays near it is what makes motion look even. Buying 240 Hz and then playing at 70 FPS without VRR wastes most of what you paid for in the glass.

Use it next to the other timing tools

If a review quotes only milliseconds, convert them on the FPS-to-milliseconds page (1,000 ÷ FPS). If you are choosing a pair of parts, remember that chasing unused frames at 1080p is often a processor-and-engine question, which is why the balance-note tool exists and why it still will not print a fake FPS.

Nothing here measures your PC. Type the refresh you set in the operating system (not only the sticker on the box) and the FPS overlay you actually see in the title you play.

The division runs locally. There is no overlay hook and no driver download.

Frame generation and why extra FPS can change meaning

Some modern upscalers add generated frames that the game engine itself did not fully render. Those frames can raise an overlay FPS figure without giving you the same input-latency profile as native frames. This page treats whatever FPS number you type as pictures produced per second and compares it with the panel refresh clock. If your overlay is counting generated frames, say so to yourself before you celebrate unused headroom.

Television sets add another layer of processing — motion smoothing, image interpolation, game modes that bypass some of that pipeline. A 120 Hz TV in a film mode is not the same object as a 120 Hz gaming monitor with a low-latency mode enabled. Type the refresh you actually selected in the picture menu.

If you came here after reading the electricity-bill calculator, remember that unused rendered frames still cost watts. Capping near refresh is one of the few free ways to keep a desktop quieter without changing parts.

Frequently asked questions

Can a 144 Hz panel show 200 unique FPS?

Not as 200 unique new pictures per second. The unique figure is the minimum of FPS and refresh — here 144 — and 56 frames are extra produced frames.

What are unused refresh slots?

When FPS is below refresh and there is no variable refresh, some refresh opportunities repeat an old picture. At 144 Hz and 80 FPS there are 64 unused slots.

Does this measure input lag?

No. See the FPS-to-milliseconds page for frame time, which is also not input lag.

What about VRR?

Variable refresh can wait for the next frame inside a supported range. It does not invent pictures the GPU never drew.

This tool runs entirely in your browser. Figures are illustrations from the inputs you type, not a quote, diagnosis, official result or legal advice. Always check the cited official source before you act. Nothing you type is sent to a server.