⚡Free Tools

Keyboard Tester

Press any key to start. Find dead, stuck or swapped keys, check how many keys register at once for gaming, and catch chattering switches that type twice — with the raw key and code values for every press.

Just start pressing keys. Blue = held now, green = tested, red = chatter detected.

Held now:

Most keys held at once:

Chatter:

EventkeycodekeyCodelocationΔ

How to test your keyboard

Open the page and start pressing keys — there is nothing to click first. Every key you press lights up blue while you hold it and turns green once it has been tested, so after one sweep across the keyboard you can see at a glance which keys never registered. The counters underneath show how many keys you have covered, how many are held right now, the most keys you have held at once (your rollover), how many presses were counted and whether any key chattered — fired twice when you pressed it once. The event table on the right shows the raw data for every press: the key value (what character it types), the code value (which physical key it is), the old keyCode number, its location (left, right or numpad) and the time since the previous event.

Choose Full size for a keyboard with a number pad, or TKL / laptop for tenkeyless boards and most laptops. With Capture keys on, the page stops the browser from acting on keys like Space (scroll), Tab (focus), F5 (reload) or Ctrl+S (save), so you can test them safely. Turn it off if you want to use Tab to move around the page.

Finding dead or sticky keys

Sweep every row from left to right. A key that stays white after you have pressed it firmly is not reaching the computer at all — check whether it works in another program, then suspect the switch, the keycap or (on laptops) the ribbon cable. A key that stays blue after you let go is stuck down: either the switch is sticking mechanically, or the key-up signal is missing. The tester clears stuck keys if you switch tabs, so you can start again.

The test also shows whether two keys are mixed up. If pressing the key labelled \ lights the Enter area, or the left Shift lights up the key next to it, your keyboard is probably set to a different physical layout (ISO vs ANSI) than the one shown, or the operating-system language layout differs — the code column always shows the physical key, while key shows what your current language layout types.

Rollover and ghosting: how many keys at once?

Games often need several keys at the same time: W and D to run diagonally, Shift to sprint, Space to jump and maybe a number key to switch weapons. Key rollover is the number of keys a keyboard can report simultaneously. Most cheap membrane keyboards guarantee only two or three keys in some combinations; many gaming keyboards advertise 6KRO (six keys, the limit of the basic USB “boot protocol” report) or NKRO (n-key rollover — every key independently).

To test it, pick a rollover preset, such as W A S D + Shift + Space. The keys you need are outlined in orange. Press and hold all of them together; if every one turns blue, the preset shows a green tick. If one stays white, your keyboard is blocking that combination. The “most keys held at once” counter records your best result — mash as many keys as you can with both hands to find the real limit.

Ghosting is the opposite problem: an extra key that you did not press appears because of how the key matrix is wired. Modern keyboards almost always block instead of ghost, but if a key you did not touch lights up while you hold a combination, you have found a ghost. Note that a browser test can only see what the operating system passes on, so it can confirm problems but cannot certify a keyboard as true NKRO — some Bluetooth keyboards and USB hubs also limit how many keys get through.

Key chatter: the double-typing fault

Chatter is a common fault on worn mechanical switches: you press a key once but it types twice (“helllo”), because the metal contacts bounce and the keyboard’s debounce logic does not filter it. The tester flags a press as chatter when the same key goes down again within a very short time after it came up — 35 milliseconds by default. Human fingers cannot press, release and press again that fast, so a hit is almost certainly the switch. Chattering keys turn red on the map and are listed with a count.

To test a suspect key, tap it 30–50 times at a normal speed. One or two flags on a key you hammered very fast may be your own finger; repeated flags at normal speed mean the switch is failing. You can raise the threshold to 50–60 ms to be stricter, or lower it if you are a very fast typist. Common fixes are blowing out dust, using the keyboard maker’s software to increase the debounce time, contact cleaner on older switches, or replacing a hot-swappable switch.

Keys that a web page cannot see

Laptop keyboard checks before you buy or return

Buying a second-hand laptop or checking a new one within the return window? Run a full sweep (coverage should reach 100% of the keys your laptop actually has — switch to TKL), test the arrow keys and Enter for chatter with 30 quick taps each, and hold W A S D + Shift + Space to check gaming combinations. Use Copy report to paste the results into a message or a service request: it lists the keys tested, your best rollover, any chattering keys and every key still untested.

Privacy

Everything happens in your browser. Key presses are not recorded anywhere, not sent to any server and not stored — they vanish when you close or reset the page. This also makes the tester safe to use on an office or school computer. Install the page as an app from the browser menu to use it offline.

Sources and standards

Frequently asked questions

How do I test my keyboard online?

Open this page and press every key. Keys turn blue while held and green once tested; any key still white after a firm press is not reaching your computer.

How do I check key rollover or ghosting?

Pick a rollover preset like W A S D + Shift + Space and hold all keys together. If one stays white the keyboard is blocking that combination. The counter shows the most keys registered at once.

What is key chatter?

A faulty switch that types twice for one press. The tester flags a key that goes down again within 35 ms of being released — too fast for a human finger.

Why doesn’t the Fn key light up?

Fn is handled inside the keyboard and never sent to the computer. Win/Command combinations and Ctrl+Alt+Delete are also kept by the operating system.

What is the difference between key and code?

code is the physical key position (KeyQ is the key left of W, whatever your language). key is the character typed with your current layout, such as q, Q or a Hindi letter.

Does it work on a laptop or phone?

Yes. Choose TKL / laptop for keyboards without a number pad. On phones, connect a USB-OTG or Bluetooth keyboard; on-screen keyboards send generic events.

Are my key presses recorded?

No. Nothing is stored or sent anywhere; the data disappears when you reset or close the page.

Keyboard shortcuts

EscIs tested like any other key
Shift + EscPasses through to the browser