First Boot Checklist for a New Gaming PC: What to Do After Building

First Boot Checklist for a New Gaming PC: What to Do After Building

Quick answer: After building a new gaming PC, check it posts, enter the BIOS to confirm all components are detected, enable XMP or EXPO for RAM, check temperatures, set boot order, install Windows, update chipset and GPU drivers from official sources, run Windows Update, and stress test lightly. Also confirm your monitor refresh rate and storage health. These steps help catch problems early.

Key takeaways

  • Confirm components in BIOS before installing Windows.
  • Enable XMP or EXPO for RAM speed.
  • Install chipset and GPU drivers from official sites.
  • Check temperatures and fan curves.
  • Set monitor refresh rate in Windows.

Your new gaming PC has powered on and you see the BIOS screen. Congratulations – the hardest part is done. But a few important steps remain before the system is truly ready. Skipping them can leave performance on the table or hide problems that appear later. Use this checklist to go from first boot to a stable, optimised gaming PC.

1. Check the BIOS

Before installing Windows, look around the BIOS:

  • Confirm all hardware is detected: CPU model, total memory, storage drives.
  • Check CPU temperature at idle on the monitoring page. Unusually high readings may indicate a cooler mounting issue.
  • Confirm fans are detected and spinning.

Our BIOS settings guide explains common options.

2. Update the BIOS (If Needed)

If the motherboard support page lists important stability or compatibility fixes for your CPU or memory, update the BIOS. Use the method in the manual, such as a built-in flash tool with a USB drive. Never interrupt a BIOS update.

3. Enable Memory Profiles

Enable XMP or EXPO so your memory runs at its rated speed. Our guide on enabling XMP or EXPO explains how and what to do if the PC becomes unstable.

4. Set Boot Order and Install Windows

Create installation media with Microsoft’s official tool, set the USB drive as the boot device and install Windows on your fastest SSD. If you have multiple drives, disconnecting other drives during installation avoids installing to the wrong disk.

5. Install Drivers in the Right Order

  1. Chipset drivers from the motherboard or CPU maker’s website.
  2. Graphics drivers from NVIDIA, AMD or Intel.
  3. Network and audio drivers from the motherboard’s support page if Windows did not install them.
  4. Other drivers for peripherals and RGB, only if you need them.

Download drivers from official sources only.

6. Run Windows Update

Install all available updates, restart and check again until no more updates are listed. Updates include security fixes and compatibility improvements.

7. Set Display Refresh Rate

Make sure the monitor is connected to the graphics card and set to its maximum refresh rate in Windows’ advanced display settings. Many new builders forget this and play at 60 Hz on a high refresh monitor.

8. Check Storage and Partitions

Open Disk Management and initialise any additional drives. Assign drive letters and set up game library folders on your preferred drive.

9. Install Monitoring Tools

Install a lightweight tool to monitor temperatures, clock speeds and usage. You will use it during stress testing and gaming to make sure everything behaves normally.

10. Stress Test the System

Run CPU, GPU and memory tests to confirm stability and check temperatures. Our guide on how to stress test a gaming PC walks you through it. Do this early so any faulty parts can be returned within the return window.

11. Set Fan Curves

Use the BIOS or motherboard software to set fan curves that balance noise and cooling. A gentle curve at idle and a stronger ramp under load works for most builds.

12. Install Games and Launchers

Install your preferred launchers and set library folders on your fast SSD. Begin downloading large games while you finish other setup steps.

13. Back Up and Create a Restore Point

Once everything is set up, create a system restore point. Consider making a full system image to an external drive so you can return to this clean state if something goes wrong.

14. Tidy Up and Note Your Specs

Note your exact component models, BIOS version and driver versions. Keep receipts and warranty details in one place. This makes future troubleshooting and warranty claims much easier.

Common First-Boot Mistakes

  • Plugging the monitor into the motherboard instead of the graphics card.
  • Forgetting to enable memory profiles.
  • Leaving the refresh rate at 60 Hz.
  • Installing unnecessary bloatware from motherboard bundles.
  • Skipping stability testing.

Security Basics

While setting up, enable Windows security features, set a strong account password or PIN and turn on automatic updates for your browser and launchers. Install only software you need from official sources. A clean, secure system is easier to maintain and less likely to suffer slowdowns from unwanted programs.

Personalise Without Bloat

It is tempting to install every utility that came with your parts. RGB and monitoring software can be useful, but several overlapping programs may conflict or slow startup. Install one tool per job, and remove anything you do not use after the first week.

Checking That Everything Runs as Expected

After drivers are installed, take ten minutes to confirm the basics. In Task Manager’s Performance tab, check that the memory speed matches your kit’s rating and that the GPU is listed correctly. In the GPU driver software, confirm the card is running in the expected PCIe slot mode. Play a game you know well and watch the monitoring overlay: GPU usage should be high in demanding scenes, temperatures should settle at reasonable levels and fans should respond to load. If something looks unusual, such as the GPU staying at low usage while frame rates are poor, investigate before installing many more programs. Problems are easier to diagnose on a clean system.

Plan Your Storage Layout

Decide early where games, recordings and downloads will live. A tidy layout, for example the system on the fastest SSD, games on a second SSD and recordings on a large drive, saves effort later.

Practical Guide: Going Deeper

First boot checklist

Step Purpose
POST check Confirms basic hardware
BIOS detection Sees CPU, RAM, storage
XMP or EXPO Correct RAM speed
Temperature check Cooling works
Windows install Operating system
Drivers and updates Stability and performance
Stress test Detect issues

BIOS Settings to Check

Memory Profiles

Enable XMP or EXPO to run RAM at rated speed.

Fan Curves

Adjust fan curves for noise and cooling balance.

Driver Installation Order

Chipset First

Install chipset drivers from motherboard or CPU maker.

GPU Drivers

Install the latest graphics drivers.

Testing Stability

Light Stress Tests

Run benchmarks and games while monitoring temperatures.

Memory Testing

Use memory tests if you see crashes.

Final Touches

Cable Management

Tidy cables for airflow.

Backups

Set up backups and restore points.

Step-by-Step Action Plan

  1. Power on and confirm the PC reaches the BIOS screen.
  2. Check CPU, RAM capacity and storage are detected, then enable XMP or EXPO.
  3. Watch CPU temperature at idle for a few minutes.
  4. Install Windows from an official USB installer.
  5. Install chipset, GPU and network drivers, then run Windows Update.
  6. Play a demanding game for 30 minutes while monitoring temperatures.

Common Mistakes to Avoid

  • Plugging the monitor into the motherboard instead of the graphics card.
  • Forgetting the CPU power cable or second PCIe power connector.
  • Leaving the plastic film on the cooler base.
  • Installing drivers from unofficial download sites.

Quick Glossary

  • POST: Power-on self-test the motherboard runs before booting.
  • XMP/EXPO: Memory profiles that set RAM to its rated speed.
  • Chipset driver: Software that lets Windows use motherboard features properly.
  • Stress test: A heavy workload used to check stability and temperatures.

Final Thoughts

A careful first boot checklist helps ensure your new gaming PC runs smoothly. Check hardware detection, enable memory profiles, install drivers, monitor temperatures and test stability. Taking time now prevents headaches later.

Related reading:

Frequently Asked Questions

Should I update BIOS on a new build?

Only if needed for compatibility or fixes.

Why is my RAM speed low?

XMP or EXPO may be off.

Should I update the BIOS on a new build?

Only if the update fixes issues relevant to your hardware or adds support you need. Follow the manual carefully.

In what order should I install drivers?

Chipset first, then graphics, then network, audio and others.

How do I know my new PC is stable?

Run CPU, GPU and memory stress tests and play demanding games for an extended session without crashes.

Do I need to install motherboard software?

Not always. Install only the utilities you actually need.

Leave a Comment

Your email address will not be published. Required fields are marked *